Most Level 3 EV charger bulk order Australia programs stall at the grid connection, not the hardware. Sennan supplies 60kW and 80kW CCS2 DC units engineered for weak-grid and remote sites, with wide voltage tolerance and 4G connectivity. We are a source manufacturer that locks one specification across your whole programme.
Product at a glance
- Platform: SNEV series 30-240kW Ev Charging Station, specified at 60kW or 80kW for each site in the programme
- Classification: Level 3 in Australian usage means DC fast charging; our 60-80kW units sit in the working band for commercial, roadhouse and corridor sites
- Connector: CCS2, the standard used in Australia, matching locally sold vehicles
- Support for bulk buyers: consistent specification across all units, one documentation pack, containerized mixed loading
Technical Specifications, configured for Australian sites
The 60kW Level 3 DC charger CCS2 IP55 option below follows Australian connector practice and remote-site requirements, with the enclosure upgrade specified for dust and coastal exposure.
Parameter | Specification | Australia Adaptation
Rated output | 60kW or 80kW, single gun max 200A, dual gun available | 20-80% in roughly 30-40 minutes; dual gun serves two bays at remote stops where every parking space counts
Connector | CCS2, single or dual gun | CCS2 is the Australian DC standard; note it differs from the North American CCS1, a common sourcing error worth checking before ordering
Connectivity and protocol | OCPP 1.6, upgrade path to 2.0; 4G, Ethernet, Wi-Fi | 4G keeps roadhouse and corridor sites online without fixed internet; open protocol for Australian CPO platforms
Protection and environment | IP54 (IP55 optional), -30C to +65C, humidity 0-95% | Handles outback dust, coastal humidity and summer heat; lightning and surge protection included
Input supply | 380V AC three-phase, 50/60Hz | Confirm site supply with the local network provider; wide-frequency tolerance supports mixed grid conditions
Application Scenarios for Australian Buyers
✅ Highway roadhouses and remote stops, for CPOs and roadhouse operators. Long inter-city stretches have few alternatives, and a downed unit leaves drivers stranded between towns. A Level 3 charger for remote highway and roadhouse Australia sites must survive dust, heat and distance: at 60kW it restores roughly 200 km of driving range in 30-40 minutes, and 4G connectivity keeps monitoring live where no fixed internet exists.
✅ Regional town centres, for councils and retailers. Shopping and service trips run one to two hours, matching a full session. The <60dB noise rating suits main-street and covered car parks, and pairing DC units with our
Ac Ev Charger covers both quick top-ups and all-day parking on one connection.
✅ Fleet depots, for delivery, agricultural and municipal fleets. Regional fleets return on fixed schedules, and dual-gun 80kW units with OCPP load balancing charge two vehicles per connection while spreading the load overnight to limit demand charges. For operators weighing the 60kW Level 3 DC charger CCS2 IP55 configuration against dual-gun 80kW units, both run on the same platform, and the IP55 enclosure suits dusty yards.
✅ Solar-plus-charging sites, for station operators and landholders. Off-grid-leaning locations are pairing solar with charging across Australia. We support these builds with mixed loading and grid-ready accessories including our
High And Low Voltage Prefabricated Substation, so generation, storage and charging are engineered together.
✅ Bulk programmes, for CPOs and distributors rolling out statewide. Standardize one specification across every site in a Level 3 EV charger bulk order Australia programme, reserve the
Flexible Charging Stack architecture for future ultra-fast hubs, and keep spares and service consistent across the network.
New Zealand note: the same specification applies. Units ship with CCS2, and documentation can be prepared for the NZ market alongside Australian orders.
Reference Case Study
We have not yet published an Australian deployment, so here is our flagship B2B case. It shows exactly how we deliver for network rollouts, and detailed references can be shared at the quotation stage.
SOL Group is an energy group with years of solar project experience. When their clients began asking for charging infrastructure, the group had no equipment line. After an exhibition demonstration and multi-round technical evaluation covering quality, connector compatibility, operating conditions and long-term supply, SOL Group signed a long-term strategic cooperation agreement with Sennan. The first order shipped as one 40-foot container mixing DC fast chargers and AC EV Charger units, configured for commercial, residential and public scenarios.
Indicator | Before cooperation | After cooperation
Charging portfolio | Solar projects only | Mixed AC and DC fleet from one supplier
Typical recharge | 6-8 hours on AC | About 40 minutes for 20-80% on 60kW DC
First order | No charging equipment line | One 40-foot container, AC and DC combined
Supply model | No equipment partner | Long-term strategic cooperation agreement
Rollout | No charging sites | Network build-out underway across multiple regions
For Australian operators the same delivery model applies: site-by-site specification against grid reality, containerized mixed loading, and phased rollout state by state, starting from a single Level 3 charger for remote highway and roadhouse Australia pilot unit if you want to validate before scaling.
Why Choose Us
- 11+ years manufacturing charging and distribution equipment, 15+ qualification certificates including CE and TUV, serving 1,000+ customers across 10+ core economies.
- Source factory supporting bulk programmes: consistent unit-to-unit specification, one documentation pack for the whole order, and an integrated range covering chargers plus the switchgear and High and Low Voltage Prefabricated Substation behind them.
Customization Service
- Programme customization for Level 3 EV charger bulk order Australia projects: one locked specification across all units, with colour, logo and cabinet branding available for operators launching under their own label.
- Site configuration: IP55 upgrade for exposed and dusty sites, extended cable lengths, and mixed container loading that combines DC units, EV charging station accessories and Flexible Charging Stack power cabinets to maximize freight efficiency.
After-sales Service
- Remote-first support: 4G and OCPP connectivity lets our engineers diagnose most faults and push firmware updates without a site visit, which matters most when sites are hundreds of kilometres apart.
- Spare parts programme: critical spares are stocked and dispatched on priority, and warranty terms are stated clearly in every quotation.
How to Order
① Inquiry. Send programme size, site types, power class and state coverage.
② Quotation. Specification confirmed and formal quote within 1 business day. MOQ 1 set; T/T or L/C.
③ Verification. Optional sample unit for field testing before programme commitment.
④ Production. 30% deposit starts production; standard lead time 25-60 days.
⑤ Inspection. Test reports and photos for approval before balance payment.
⑥ Delivery and onboarding. FOB or CIF from Shanghai or Shenzhen in export wooden crates, with OCPP integration supported at commissioning.
FAQ
Q1: What is a Level 3 charger in Australia?
Level 3 is the Australian term for DC fast charging, covering roughly 25kW to 350kW depending on the source. Our 60kW and 80kW units sit in the working band used at commercial, roadhouse and corridor sites.
Q2: Do Australian EVs use CCS2 or CCS1 connectors?
Australia uses CCS2, the same standard as Europe. CCS1 is the North American variant and will not fit locally sold vehicles, so check the connector specification before ordering from any overseas supplier.
Q3: Can these chargers run at remote sites without fixed internet?
Yes. Units connect over 4G as well as Ethernet and Wi-Fi, and speak OCPP 1.6 with an upgrade path to 2.0, so remote monitoring and billing work at roadhouse and corridor locations.
CTA
[ Get a programme quote ] Send your site list and receive a formal quotation within 1 business day
[ Request the CCS2 spec pack ] Datasheets, certificates and connector documentation
[ Book a video factory tour ] Walk the production line and QC live with our engineers
Contact Now
