Strata buildings are the hardest charging segment in Australia: shared supply, committee approvals, and bays that sit idle without per-owner metering. Sennan supplies Level 2 AC charger bulk order Australia programmes with 7kW and 22kW Type 2 units and OCPP load balancing. We are a source manufacturer that locks one specification across your whole programme.
Product at a glance
- Platform: SNEV series Ev Charging Station range, configured at 7kW single-phase or 22kW three-phase for each site in the programme
- Australian classification: Level 2 in Australian usage means AC charging; our range covers driveways on single-phase and commercial car parks on three-phase
- Strata-ready: a Level 2 charger for strata and workplace car parks Australia build starts with per-bay metering and load balancing, not just hardware
- Connector: Type 2 as standard, matching every Australian-sold EV
- Display options: 6.1-inch colour screen for commercial sites, screenless variant for garages
Technical Specifications, configured for Australian sites
The 7kW 22kW Level 2 AC charger Type 2 IP54 range below follows Australian connector practice, with the connector fixed to Type 2.
Parameter | Specification | Australia Adaptation
Rated output | 7kW single-phase or 11kW / 22kW three-phase, max 32A | Most Australian homes charge on single-phase 7kW; strata and commercial sites step up to three-phase 22kW
Input supply | 220VAC single-phase / 380VAC three-phase, 50/60Hz | Matches Australian nominal 230V / 400V supplies; confirm three-phase availability before specifying 22kW
Connector and cable | Type 2, 5m cable with customizable length | Type 2 fits every Australian-sold EV; 5m reach covers most parking positions
Connectivity and protocol | OCPP 1.6; WiFi, 4G, RFID, APP | Connects to Australian CPO platforms for billing, monitoring and access control
Protection and environment | IP54, -30C to +65C, humidity 0-95%, noise under 60dB | Outdoor-rated for Australian conditions; quiet enough for covered car parks
Application Scenarios for Australian Buyers
✅ Strata and multi-unit residential, for strata managers and developers. Owners share one building supply, so RFID access and OCPP billing separate each owner, while load balancing keeps peak demand within the site connection. This is the core use case for a Level 2 charger for strata and workplace car parks Australia deployment.
✅ Workplaces, for facility managers and fleet operators. Daytime dwell time matches 7kW and 22kW sessions, and the 6.1-inch screen version supports card and app access for employee or visitor billing. Where the supply is the constraint, we scope the site with our
High And Low Voltage Prefabricated Substation so the electrical package is engineered once.
✅ Shopping centres and destination charging, for retail operators. One-to-three-hour dwell times suit 22kW sessions, and busier sites can mix AC bays with our
Dc Charging Station range for drivers who need a quick top-up.
✅ Fleet depots, for delivery, agricultural and municipal fleets. Vehicles return on fixed schedules. OCPP load balancing spreads overnight sessions across the depot service to limit demand charges.
✅ Bulk programmes, for CPOs and distributors rolling out statewide. Standardize one specification across every site in a Level 2 AC charger bulk order Australia programme, reserve the
Flexible Charging Stack architecture for future high-power hubs, and keep spares and service consistent across the network.
New Zealand note: the same specification applies. Units ship with Type 2, and documentation can be prepared for the NZ market alongside Australian orders.
Reference Case Study
We have not yet published an Australian AC deployment, so here is our flagship B2B case. It shows exactly how we deliver for network rollouts, and detailed references can be shared at the quotation stage.
SOL Group is an energy group with years of solar project experience. When their clients began asking for charging infrastructure, the group had no equipment line. After an exhibition demonstration and multi-round technical evaluation covering quality, connector compatibility, operating conditions and long-term supply, SOL Group signed a long-term strategic cooperation agreement with Sennan. The first order shipped as one 40-foot container mixing DC fast chargers and
Ac Ev Charger units, configured for commercial, residential and public scenarios.
Indicator | Before cooperation | After cooperation
Charging portfolio | Solar projects only | Mixed AC and DC fleet from one supplier
Typical recharge | 6-8 hours on standard AC | Overnight or workday completion on OCPP-managed AC bays
First order | No charging equipment line | One 40-foot container, AC and DC combined
Supply model | No equipment partner | Long-term strategic cooperation agreement
Rollout | No charging sites | Network build-out underway across multiple regions
For Australian operators the same delivery model applies: site-by-site specification against supply reality, containerized mixed loading, and phased rollout state by state, starting from a single Level 2 charger for strata and workplace car parks Australia pilot bay.
Why Choose Us
- 11+ years manufacturing charging and distribution equipment, 15+ qualification certificates including CE and TUV, serving 1,000+ customers across 10+ core economies.
- Source factory supporting bulk programmes: consistent unit-to-unit specification, one documentation pack for the whole order, and an integrated range covering chargers plus the switchgear and High and Low Voltage Prefabricated Substation behind them.
Customization Service
- Programme customization for Level 2 AC charger bulk order Australia projects: one locked specification across all units, with colour, logo and cabinet branding available for operators launching under their own label.
- Site configuration: extended cable lengths, display options, and mixed container loading that combines AC units, EV charging station accessories, DC Charging Station cabinets and Flexible Charging Stack power modules to maximize freight efficiency. Every unit in a Level 2 AC charger bulk order Australia programme carries the 7kW 22kW Level 2 AC charger Type 2 IP54 specification locked to your order.
After-sales Service
- Remote-first support: WiFi, 4G and OCPP connectivity lets our engineers diagnose most faults and push firmware updates without a site visit, which matters most when sites are spread across states.
- Spare parts programme: critical spares are stocked and dispatched on priority, and warranty terms are stated clearly in every quotation.
How to Order
① Inquiry. Send programme size, site types, power class and state coverage.
② Quotation. Specification confirmed and formal quote within 1 business day. MOQ 1 set; T/T or L/C.
③ Verification. Optional sample unit for field testing before programme commitment.
④ Production. 30% deposit starts production; standard lead time 25-60 days.
⑤ Inspection. Test reports and photos for approval before balance payment.
⑥ Delivery and onboarding. FOB or CIF from Shanghai or Shenzhen in export wooden crates, with OCPP integration supported at commissioning.
FAQ
Q1: What is a Level 2 charger in Australia?
Level 2 is the Australian term for AC charging, covering roughly 2kW to 22kW. Our 7kW single-phase and 22kW three-phase units sit in this band, suited to overnight and dwell-time charging rather than highway corridors.
Q2: Do Australian EVs use Type 1 or Type 2 connectors?
Australia uses Type 2, the same standard as Europe. Type 1 J1772 is the North American connector and will not fit locally sold vehicles, so check the connector specification before ordering from any overseas supplier.
Q3: Can an AC charger bill individual owners in a strata building?
Yes. OCPP 1.6 connectivity links the unit to your chosen back-office platform for billing and monitoring, RFID separates each owner's account, and load balancing spreads sessions across the building supply.
CTA
[ Get a programme quote ] Send your site list and receive a formal quotation within 1 business day
[ Request the Type 2 spec pack ] Datasheets, certificates and OCPP integration notes
[ Book a video factory tour ] Walk the production line and QC live with our engineers